Category: Tutorial

TILA 2-hole Beads Wreath Pendant Tutorial

Source: Miyuki Co. Ltd. Finished Size: About 47cm-52cm including clasp Materials:  Miyuki Tila 2-hole beads, Delica beads, 3mm pearls, 3mm rondelle crystals, nylon beading thread, suede cord, cord ends, clasp Tools:  Scissors, Pliers, Ruler, Toothpick, Beading Needles 1. Use six 15cm (5.91") lengths of nylon thread to make 3 pieces each of [A] and [B]: Read More

Tila 2-Hole Beads Strand Necklace

Source: Miyuki Co. Ltd. Finished Size:  About 95cm Materials:  Coated flexible beading wire, beading thread, bugle beads, 11/0 seed beads, Miyuki Tila beads, 14mm clear faceted plexi (acrylic) or other faceted beads, 10-12mm black faceted beads, bead tips, bead crimps, clasp, jump rings Tools:  Scissors, ruler, pliers, 2 beading needles 1. To make the beaded Read More

Jewellery with Bezels and Epoxy

Metal Bezels

Great For
High end jewelry creations. Bezels are ideal for filling with Apoxie Clay designs and pointed back chaton stones, image designs with an Epoxy resin coating. Epoxy cement finishing. Resin doming and cabouchons.

Features
-Available in 5 Finishes.
-Textured middle adheres better to materials.
-Can be baked up to 375 F degrees, in an oven.
-Silver Plated has a Brass base and are non-tarnishable.
-Raw Brass and Antique Brass are made of 100% Brass.
-Raw Copper and Antique Copper are made of 100% Copper.
-Silver Plating is hypo allergenic.

Apoxie Sculpt


Apoxie Clay is great for setting materials into bezels and creating shapes and designs for jewerly components. It can be used to fill bezels and frames, or alone to create simple designs. Used for model making, sculptures, restoration, statue work, and many more arts and crafts purposes.

Apoxie Clay has a Putty-like smooth consistency, 2 to 3 hours working time, self-hardenong, no ovens, kilns or fumes, 0% shrinking and cracking, lightweight, semi-gloss finish, permanent, waterproof, freeze-thaw stable, outdoor quality. Shelf life can be maintained or extending by refrigerating or freezing.

Instructions

Step 1

Use equal parts of part A colored clay and part B grey setting compound

Step 2

Mix and knead Part A and B together for about 2 minutes until clay is one solid color with no streaks. Proper mixing ensures the clay will cure.

Step 3

Form the clay into any shape. A ball shape is ideal for creating a cabouchon look. Mold the clay into a bezel setting.

Step 4

Using a toothpick or applicator with a beeswax tip:
Pick up the chaton crystal from the top of the crystal.
Place it into the clay surface.
Make sure the pointed end is fully immersed into the clay.
The chaton should sit slightly below the edge of the clay surface. This will insure the chaton stays securely in the clay when dry.
 

Finished

Create your own unique designs. Clay can be painted when wet or dry, textured or brushed.

See our product list below: Read More

Magnetic Wings Tutorial featuring Varaform

Tutorial by Vickybunnyangel As someone who travels a lot and works at various events as a cosplayer, it’s important for me to create things to be durable and lightweight. The ability of fitting into a suitcase, and also causing the least amount of strain on my body after a long day of wear, are the Read More

Fosshape Tutorial Videos

The following three videos showcase Costume and Prop building with Fosshape. Read More

1 2